Process: Quality and geometry

89 settings. Keys are OrcaSlicer's own names. See the index for the other groups and the guide for how to read and apply them.

#detect_thin_wall

Detect thin walls

• Type: boolean
• Default: off
• Used only when: Wall generator (wall_generator) is not "arachne"
• Changing it redoes: perimeters
• PrintPilot class: edit (may change in a plate override)

#dont_filter_internal_bridges

Dont filter internal bridges

• Type: enum
• Default: "disabled"
• Values: disabled, limited, nofilter
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#elefant_foot_compensation

Elephant foot compensation

• Type: number
• Unit: mm
• Default: 0
• Recommended range: 0 to 1
• Orca limits: 0 to none
• Changing it redoes: contours
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: The first layer is pulled in more to counter elephant foot. lower: The first layer flares out more

#elefant_foot_compensation_layers

Elefant foot compensation layers

• Type: integer
• Unit: layers
• Default: 1
• Recommended range: 1 to no maximum
• Changing it redoes: contours
• PrintPilot class: read (not in the catalog: never written)

#elefant_foot_layers_density

Elefant foot layers density

• Type: percent (a number, 15 means 15%)
• Unit: %
• Default: 100
• Recommended range: 50 to 100
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#enable_arc_fitting

Arc fitting

• Type: boolean
• Default: off
• Changing it redoes: G-code only
• PrintPilot class: edit (may change in a plate override)

#enable_extra_bridge_layer

Enable extra bridge layer

• Type: enum
• Default: "disabled"
• Values: disabled, external_bridge_only, internal_bridge_only, apply_to_all
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#enable_mixed_color_sublayer

Enable mixed color sublayer

• Type: boolean
• Default: off
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filter_out_gap_fill

Filter out gap fill

• Type: number
• Unit: mm
• Default: 0
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#hole_to_polyhole

Print round holes as polyholes

• Type: boolean
• Default: off
• Changing it redoes: contours
• PrintPilot class: edit (may change in a plate override)

#hole_to_polyhole_max_edges

Hole to polyhole max edges

• Type: integer
• Default: 50
• Recommended range: 3 to no maximum
• Changing it redoes: contours
• PrintPilot class: read (not in the catalog: never written)

#hole_to_polyhole_threshold

Hole to polyhole threshold

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "0.01"
• Changing it redoes: contours
• PrintPilot class: read (not in the catalog: never written)

#hole_to_polyhole_twisted

Hole to polyhole twisted

• Type: boolean
• Default: on
• Changing it redoes: contours
• PrintPilot class: read (not in the catalog: never written)

#initial_layer_line_width

Line width on the first layer

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "0"
• Recommended range: 0.1 to 2
• Orca limits: 0 to 1000
• Automatic: The value 0 means automatic and is always allowed.
• Changing it redoes: perimeters
• PrintPilot class: edit (may change in a plate override)

#initial_layer_min_bead_width

Initial layer min bead width

• Type: percent (a number, 15 means 15%)
• Unit: %
• Default: 85
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#initial_layer_print_height

First layer height

• Type: number
• Unit: mm
• Default: 0.2
• Recommended range: 0.08 to 0.8
• Orca limits: 0 to none
• Changing it redoes: layers (the whole slice)
• Easy mode: Set by the Detail control.
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: A thicker first layer hides bed unevenness but is harder to squish flat. lower: A thinner first layer needs a level bed

#inner_wall_line_width

Line width of inner walls

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "0"
• Recommended range: 0.1 to 2
• Orca limits: 0 to 1000
• Automatic: The value 0 means automatic and is always allowed.
• Used only when: Wall loops (wall_loops) is above 0
• Changing it redoes: perimeters
• PrintPilot class: edit (may change in a plate override)

#internal_bridge_flow

Internal bridge flow

• Type: number
• Default: 1
• Recommended range: 0 to 2
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#internal_solid_infill_line_width

Line width of solid infill

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "0"
• Recommended range: 0.1 to 2
• Orca limits: 0 to 1000
• Automatic: The value 0 means automatic and is always allowed.
• Changing it redoes: perimeters
• PrintPilot class: edit (may change in a plate override)

#ironing_angle

Ironing angle

• Type: number
• Unit: degrees
• Default: 0
• Recommended range: 0 to 359
• Used only when: Ironing type (ironing_type) is not "no ironing"
• Changing it redoes: infill
• PrintPilot class: read (not in the catalog: never written)

#ironing_angle_fixed

Ironing angle fixed

• Type: boolean
• Default: off
• Changing it redoes: infill
• PrintPilot class: read (not in the catalog: never written)

#ironing_expansion

Ironing expansion

• Type: number
• Unit: mm
• Default: 0
• Recommended range: -100 to 100
• Changing it redoes: infill
• PrintPilot class: read (not in the catalog: never written)

#ironing_flow

Ironing flow

• Type: percent (a number, 15 means 15%)
• Unit: %
• Default: 10
• Recommended range: 0 to 30
• Orca limits: 0 to 100
• Used only when: Ironing type (ironing_type) is not "no ironing"
• Changing it redoes: G-code only
• PrintPilot class: edit (may change in a plate override)

#ironing_inset

Ironing inset

• Type: number
• Unit: mm
• Default: 0
• Recommended range: 0 to 100
• Used only when: Ironing type (ironing_type) is not "no ironing"
• Changing it redoes: infill
• PrintPilot class: read (not in the catalog: never written)

#ironing_pattern

Ironing pattern

• Type: enum
• Default: "rectilinear"
• Values: rectilinear, concentric
• Used only when: Ironing type (ironing_type) is not "no ironing"
• Changing it redoes: infill
• PrintPilot class: read (not in the catalog: never written)

#ironing_spacing

Ironing line spacing

• Type: number
• Unit: mm
• Default: 0.1
• Recommended range: 0.05 to 0.5
• Orca limits: 0 to 1
• Used only when: Ironing type (ironing_type) is not "no ironing"
• Changing it redoes: infill
• PrintPilot class: edit (may change in a plate override)

#ironing_speed

Ironing speed

• Type: number
• Unit: mm/s
• Default: 20
• Recommended range: 5 to 200
• Orca limits: 1 to none
• Used only when: Ironing type (ironing_type) is not "no ironing"
• Changing it redoes: G-code only
• PrintPilot class: edit (may change in a plate override)

#ironing_type

Ironing type

• Type: enum
• Default: "no ironing"
• Values: no ironing, top, topmost, solid
• Changing it redoes: infill
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Ironing smooths chosen top surfaces and adds time. lower: Without ironing top surfaces print faster and rougher

#is_infill_first

Is infill first

• Type: boolean
• Default: off
• Changing it redoes: perimeters
• PrintPilot class: read (not in the catalog: never written)

#layer_height

Layer height

• Type: number
• Unit: mm
• Default: 0.2
• Recommended range: 0.04 to 0.8
• Orca limits: 0 to none
• Changing it redoes: layers (the whole slice)
• Easy mode: Set by the Detail control. 0.28 to 0.08 mm on a 0.4 mm nozzle, scaled with the nozzle, kept between 0.2 and 0.75 of its diameter.
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Thicker layers print faster and show more layer lines. lower: Thinner layers print slower and look smoother

#line_width

Default line width

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "0"
• Recommended range: 0.1 to 2
• Orca limits: 0 to 1000
• Automatic: The value 0 means automatic and is always allowed.
• Changing it redoes: G-code only
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Wider lines print faster and bond better. lower: Narrower lines resolve finer detail

#max_travel_detour_distance

Max travel detour distance

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "0"
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#min_bead_width

Min bead width

• Type: percent (a number, 15 means 15%)
• Unit: %
• Default: 85
• Recommended range: 0 to no maximum
• Used only when: Wall generator (wall_generator) is "arachne"
• Changing it redoes: contours
• PrintPilot class: read (not in the catalog: never written)

#min_feature_size

Min feature size

• Type: percent (a number, 15 means 15%)
• Unit: %
• Default: 25
• Recommended range: 0 to no maximum
• Used only when: Wall generator (wall_generator) is "arachne"
• Changing it redoes: contours
• PrintPilot class: read (not in the catalog: never written)

#min_length_factor

Min length factor

• Type: number
• Unit: mm
• Default: 0.5
• Recommended range: 0 to 25
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#min_width_top_surface

Min width top surface

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "300%"
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#only_one_wall_first_layer

Only one wall first layer

• Type: boolean
• Default: off
• Changing it redoes: perimeters
• PrintPilot class: read (not in the catalog: never written)

#only_one_wall_top

Single wall on the top surface

• Type: boolean
• Default: off
• Used only when: Wall loops (wall_loops) is above 0
• Changing it redoes: perimeters
• PrintPilot class: edit (may change in a plate override)

#outer_wall_line_width

Line width of outer walls

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "0"
• Recommended range: 0.1 to 2
• Orca limits: 0 to 1000
• Automatic: The value 0 means automatic and is always allowed.
• Used only when: Wall loops (wall_loops) is above 0
• Changing it redoes: perimeters
• PrintPilot class: edit (may change in a plate override)

#precise_outer_wall

Precise wall

• Type: boolean
• Default: off
• Used only when: Wall loops (wall_loops) is above 0
• Changing it redoes: perimeters
• PrintPilot class: edit (may change in a plate override)

#precise_z_height

Precise Z height

• Type: boolean
• Default: off
• Changing it redoes: layers (the whole slice)
• PrintPilot class: edit (may change in a plate override)

#resolution

Slice resolution

• Type: number
• Unit: mm
• Default: 0.01
• Recommended range: 0.001 to 0.1
• Orca limits: 0 to none
• Changing it redoes: contours
• PrintPilot class: edit (may change in a plate override)

#scarf_angle_threshold

Scarf angle threshold

• Type: integer
• Unit: degrees
• Default: 155
• Recommended range: 0 to 180
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#scarf_joint_speed

Scarf joint speed

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm/s
• Default: "100%"
• Recommended range: 1 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#scarf_overhang_threshold

Scarf overhang threshold

• Type: percent (a number, 15 means 15%)
• Unit: %
• Default: 40
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#seam_gap

Seam gap

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "10%"
• Recommended range: 0 to no maximum
• Changing it redoes: paths
• PrintPilot class: edit (may change in a plate override)

#seam_position

Seam position

• Type: enum
• Default: "aligned"
• Values: nearest, aligned, aligned_back, back, random
• Changing it redoes: paths
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Changes where layer starts and ends are placed. lower: Changes where layer starts and ends are placed

#seam_slope_conditional

Seam slope conditional

• Type: boolean
• Default: off
• Changing it redoes: paths
• PrintPilot class: read (not in the catalog: never written)

#seam_slope_entire_loop

Seam slope entire loop

• Type: boolean
• Default: off
• Changing it redoes: paths
• PrintPilot class: read (not in the catalog: never written)

#seam_slope_inner_walls

Seam slope inner walls

• Type: boolean
• Default: off
• Changing it redoes: paths
• PrintPilot class: read (not in the catalog: never written)

#seam_slope_min_length

Seam slope min length

• Type: number
• Unit: mm
• Default: 20
• Recommended range: 0 to no maximum
• Used only when: Scarf joint seam (seam_slope_type) is not "none"; and Seam slope entire loop (seam_slope_entire_loop) is off
• Changing it redoes: paths
• PrintPilot class: read (not in the catalog: never written)

#seam_slope_start_height

Seam slope start height

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "0"
• Recommended range: 0 to no maximum
• Used only when: Scarf joint seam (seam_slope_type) is not "none"
• Changing it redoes: paths
• PrintPilot class: read (not in the catalog: never written)

#seam_slope_steps

Seam slope steps

• Type: integer
• Default: 10
• Recommended range: 1 to no maximum
• Used only when: Scarf joint seam (seam_slope_type) is not "none"
• Changing it redoes: paths
• PrintPilot class: read (not in the catalog: never written)

#seam_slope_type

Scarf joint seam

• Type: enum
• Default: "none"
• Values: none, external, all
• Used only when: Spiral vase (spiral_mode) is off
• Changing it redoes: paths
• PrintPilot class: edit (may change in a plate override)

#slice_closing_radius

Slice closing radius

• Type: number
• Unit: mm
• Default: 0.049
• Recommended range: 0 to no maximum
• Changing it redoes: contours
• PrintPilot class: read (not in the catalog: never written)

#slicing_mode

Slicing mode

• Type: enum
• Default: "regular"
• Values: regular, even_odd, close_holes
• Changing it redoes: layers (the whole slice)
• PrintPilot class: read (not in the catalog: never written)

#smart_layer

Smart Layer

Automatic variable layer height. Off keeps one layer height. Quality thins layers where curved and detailed surfaces need it; Strength thins layers where the part carries load and keeps them thick elsewhere.

• Type: enum
• Default: "quality"
• Values: off (Off), quality (Smart Layer: Quality), strength (Smart Layer: Strength)
• Changing it redoes: layers (the whole slice)
• Easy mode: Set by the Smart Layer control.
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Smart Layer changes layer heights along the part. lower: One layer height throughout

#smart_layer_max_height

Smart Layer thickest layer

The thickest layer Smart Layer may use. Keep it at most three quarters of the nozzle diameter unless the material's research says otherwise.

• Type: number
• Unit: mm
• Default: 0.2
• Recommended range: 0.04 to 0.8
• Used only when: Smart Layer (smart_layer) is not "off"
• Changing it redoes: layers (the whole slice)
• Easy mode: Set by the Smart Layer control. At most half the nozzle in both modes, and about one and a half times the layer height the Detail slider gives, never closer than one step to the thinnest layer.
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Plain areas print faster and look coarser. lower: Plain areas print slower and look smoother

#smart_layer_max_step_ratio

Smart Layer largest step

The biggest change in layer height from one layer to the next, as a fraction of the previous layer. Smaller steps look smoother.

• Type: number
• Default: 0.25
• Recommended range: 0.05 to 1
• Used only when: Smart Layer (smart_layer) is not "off"
• Changing it redoes: layers (the whole slice)
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Layer height may jump more between layers. lower: Layer height changes in smaller steps

#smart_layer_min_height

Smart Layer thinnest layer

The thinnest layer Smart Layer may use. Keep it at least a quarter of the nozzle diameter unless the material's research says otherwise.

• Type: number
• Unit: mm
• Default: 0.08
• Recommended range: 0.04 to 0.8
• Used only when: Smart Layer (smart_layer) is not "off"
• Changing it redoes: layers (the whole slice)
• Easy mode: Set by the Smart Layer control. At least 20 percent of the nozzle in Quality and 30 percent in Strength, and about half the layer height the Detail slider gives.
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Fine areas get thicker layers and less detail. lower: Fine areas get thinner layers and print slower

#smart_layer_smoothing

Smart Layer smoothing

How strongly neighboring layer heights are blended. 0 follows the surface exactly, 100 gives the gentlest change.

• Type: percent (a number, 15 means 15%)
• Unit: %
• Default: 70
• Recommended range: 0 to 100
• Used only when: Smart Layer (smart_layer) is not "off"
• Changing it redoes: layers (the whole slice)
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Layer height changes more gradually. lower: Layer height follows the surface more closely

#smart_layer_smoothing_radius

Smart Layer smoothing distance

How far, along the height of the part, layer heights are blended. 0 picks eight times the thickest layer.

• Type: number
• Unit: mm
• Default: 0
• Recommended range: 0 to 20
• Used only when: Smart Layer (smart_layer) is not "off"
• Changing it redoes: layers (the whole slice)
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Layer height changes over a longer stretch. lower: Layer height changes over a shorter stretch

#sparse_infill_line_width

Line width of sparse infill

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "0"
• Recommended range: 0.1 to 2
• Orca limits: 0 to 1000
• Automatic: The value 0 means automatic and is always allowed.
• Used only when: Infill density (sparse_infill_density) is above 0
• Changing it redoes: perimeters
• PrintPilot class: edit (may change in a plate override)

#staggered_inner_seams

Staggered inner seams

• Type: boolean
• Default: off
• Changing it redoes: paths
• PrintPilot class: edit (may change in a plate override)

#support_line_width

Support line width

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "0"
• Recommended range: 0 to 1000
• Used only when: Enable support (enable_support) is on
• Changing it redoes: perimeters
• PrintPilot class: read (not in the catalog: never written)

#thick_internal_bridges

Thick internal bridges

• Type: boolean
• Default: on
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#top_surface_line_width

Line width of top surfaces

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "0"
• Recommended range: 0.1 to 2
• Orca limits: 0 to 1000
• Automatic: The value 0 means automatic and is always allowed.
• Used only when: Top shell layers (top_shell_layers) is above 0
• Changing it redoes: perimeters
• PrintPilot class: edit (may change in a plate override)

#top_surface_pattern

Top surface pattern

• Type: enum
• Default: "monotonicline"
• Values: monotonic, monotonicline, rectilinear, alignedrectilinear, concentric, hilbertcurve, archimedeanchords, octagramspiral
• Used only when: Top shell layers (top_shell_layers) is above 0
• Changing it redoes: infill
• PrintPilot class: edit (may change in a plate override)

#tree_support_auto_brim

Tree support auto brim

• Type: boolean
• Default: off
• Used only when: Enable support (enable_support) is on; and Support type (support_type) is one of "tree(auto)", "tree(manual)"
• Changing it redoes: paths
• PrintPilot class: read (not in the catalog: never written)

#unsupported_wall_last

Unsupported wall last

• Type: boolean
• Default: off
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#wall_direction

Wall direction

• Type: enum
• Default: "ccw"
• Values: ccw, cw
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#wall_distribution_count

Wall distribution count

• Type: integer
• Default: 1
• Recommended range: 1 to no maximum
• Used only when: Wall generator (wall_generator) is "arachne"
• Changing it redoes: perimeters
• PrintPilot class: read (not in the catalog: never written)

#wall_generator

Wall generator

• Type: enum
• Default: "arachne"
• Values: classic, arachne
• Changing it redoes: perimeters
• PrintPilot class: edit (may change in a plate override)

#wall_maximum_deviation

Wall maximum deviation

• Type: number
• Unit: mm
• Default: 0.025
• Recommended range: 0.005 to 0.05
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#wall_maximum_resolution

Wall maximum resolution

• Type: number
• Unit: mm
• Default: 0.5
• Recommended range: 0.005 to 0.5
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#wall_sequence

Wall printing order

• Type: enum
• Default: "inner wall/outer wall"
• Values: inner wall/outer wall, outer wall/inner wall, inner-outer-inner wall
• Used only when: Wall loops (wall_loops) is above 0
• Changing it redoes: perimeters
• PrintPilot class: edit (may change in a plate override)

#wall_transition_angle

Wall transition angle

• Type: number
• Unit: degrees
• Default: 10
• Recommended range: 1 to 59
• Used only when: Wall generator (wall_generator) is "arachne"
• Changing it redoes: contours
• PrintPilot class: read (not in the catalog: never written)

#wall_transition_filter_deviation

Wall transition filter deviation

• Type: percent (a number, 15 means 15%)
• Unit: %
• Default: 25
• Recommended range: 0 to no maximum
• Used only when: Wall generator (wall_generator) is "arachne"
• Changing it redoes: contours
• PrintPilot class: read (not in the catalog: never written)

#wall_transition_length

Wall transition length

• Type: percent (a number, 15 means 15%)
• Unit: %
• Default: 100
• Recommended range: 0 to no maximum
• Used only when: Wall generator (wall_generator) is "arachne"
• Changing it redoes: contours
• PrintPilot class: read (not in the catalog: never written)

#wipe_before_external_loop

Wipe before the outer wall

• Type: boolean
• Default: off
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#wipe_inward

Wipe inward

• Type: boolean
• Default: off
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#wipe_inward_distance

Wipe inward distance

• Type: millimeters or percent (string such as "0.42" or "110%")
• Unit: mm
• Default: "50%"
• Recommended range: 0 to 100
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#wipe_on_loops

Wipe on loops

• Type: boolean
• Default: off
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#xy_contour_compensation

X-Y contour compensation

• Type: number
• Unit: mm
• Default: 0
• Recommended range: -0.5 to 0.5
• Orca limits: none to none
• Changing it redoes: contours
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Outer contours print larger. lower: Outer contours print smaller

#xy_hole_compensation

X-Y hole compensation

• Type: number
• Unit: mm
• Default: 0
• Recommended range: -0.5 to 0.5
• Orca limits: none to none
• Changing it redoes: contours
• PrintPilot class: edit (may change in a plate override)
• Effect: higher: Holes print larger. lower: Holes print smaller

#zaa_dont_alternate_fill_direction

Zaa dont alternate fill direction

• Type: boolean
• Default: off
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#zaa_enabled

Zaa enabled

• Type: boolean
• Default: off
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#zaa_min_z

Zaa min z

• Type: number
• Unit: mm
• Default: 0.05
• Recommended range: 0 to 100
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#zaa_minimize_perimeter_height

Zaa minimize perimeter height

• Type: number
• Unit: degrees
• Default: 35
• Recommended range: 0 to 90
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)