Filament: Multi material

25 settings. Keys are OrcaSlicer's own names. See the index for the other groups and the guide for how to read and apply them.

#filament_change_length

Filament change length

• Type: list of numbers, one per extruder
• Unit: mm
• Default: [10]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_change_length_nc

Filament change length nc

• Type: list of numbers, one per extruder
• Unit: mm
• Default: [10]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_flush_volumetric_speed

Filament flush volumetric speed

• Type: list of numbers, one per extruder
• Unit: mm3/s
• Default: [0]
• Recommended range: 0 to 200
• Nullable: A profile can store nil to take the value from another profile; the key is then left out.
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_loading_speed

Filament loading speed

• Type: list of numbers, one per extruder
• Unit: mm/s
• Default: [28]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_loading_speed_start

Filament loading speed start

• Type: list of numbers, one per extruder
• Unit: mm/s
• Default: [3]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_minimal_purge_on_wipe_tower

Filament minimal purge on wipe tower

• Type: list of numbers, one per extruder
• Unit: mm3
• Default: [15]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_multitool_ramming

Filament multitool ramming

• Type: list of booleans, one per extruder
• Default: [false]
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_multitool_ramming_flow

Filament multitool ramming flow

• Type: list of numbers, one per extruder
• Unit: mm3/s
• Default: [10]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_multitool_ramming_volume

Filament multitool ramming volume

• Type: list of numbers, one per extruder
• Unit: mm3
• Default: [10]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_prime_volume

Filament prime volume

• Type: list of numbers, one per extruder
• Unit: mm3
• Default: [45]
• Recommended range: 1 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_prime_volume_nc

Filament prime volume nc

• Type: list of numbers, one per extruder
• Unit: mm3
• Default: [60]
• Recommended range: 1 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_ramming_parameters

Filament ramming parameters

• Type: list of strings, one per extruder
• Default: ["120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0|"," 0.05 6.6 0.45 6.8 0.95 7.8 1.45 ...
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_ramming_travel_time

Filament ramming travel time

• Type: list of numbers, one per extruder
• Unit: s
• Default: [0]
• Recommended range: 0 to no maximum
• Nullable: A profile can store nil to take the value from another profile; the key is then left out.
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_ramming_travel_time_nc

Filament ramming travel time nc

• Type: list of numbers, one per extruder
• Unit: s
• Default: [0]
• Recommended range: 0 to no maximum
• Nullable: A profile can store nil to take the value from another profile; the key is then left out.
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_ramming_volumetric_speed

Filament ramming volumetric speed

• Type: list of numbers, one per extruder
• Unit: mm3/s
• Default: [-1]
• Recommended range: -1 to 200
• Nullable: A profile can store nil to take the value from another profile; the key is then left out.
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_ramming_volumetric_speed_nc

Filament ramming volumetric speed nc

• Type: list of numbers, one per extruder
• Unit: mm3/s
• Default: [-1]
• Recommended range: -1 to 200
• Nullable: A profile can store nil to take the value from another profile; the key is then left out.
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_stamping_distance

Filament stamping distance

• Type: list of numbers, one per extruder
• Default: [0]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_stamping_loading_speed

Filament stamping loading speed

• Type: list of numbers, one per extruder
• Default: [0]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_toolchange_delay

Filament toolchange delay

• Type: list of numbers, one per extruder
• Default: [0]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_tower_interface_pre_extrusion_dist

Filament tower interface pre extrusion dist

• Type: list of numbers, one per extruder
• Unit: mm
• Default: [10]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_tower_interface_pre_extrusion_length

Filament tower interface pre extrusion length

• Type: list of numbers, one per extruder
• Unit: mm
• Default: [0]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_tower_interface_purge_volume

Filament tower interface purge volume

• Type: list of numbers, one per extruder
• Unit: mm
• Default: [20]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_tower_ironing_area

Filament tower ironing area

• Type: list of numbers, one per extruder
• Default: [4]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_unloading_speed

Filament unloading speed

• Type: list of numbers, one per extruder
• Unit: mm/s
• Default: [90]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)

#filament_unloading_speed_start

Filament unloading speed start

• Type: list of numbers, one per extruder
• Unit: mm/s
• Default: [100]
• Recommended range: 0 to no maximum
• Changing it redoes: G-code only
• PrintPilot class: read (not in the catalog: never written)