Docs
Pages

Settings / Reference

Process: Multi material

41 settings. Keys are OrcaSlicer's own names. See the index for the other groups and the guide for how to read and apply them.

bottom_surface_filament_id

Bottom surface filament id

  • Type: integer
  • Default: 0
  • Recommended range: 0 to no maximum
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

enable_prime_tower

Prime tower

  • Type: boolean
  • Default: off
  • Changing it redoes: paths
  • PrintPilot class: edit (may change in a plate override)
  • Effect: higher: A prime tower cleans the nozzle between colors and uses more filament. lower: Without a prime tower colors may bleed

enable_tower_interface_cooldown_during_tower

Enable tower interface cooldown during tower

  • Type: boolean
  • Default: off
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

enable_tower_interface_features

Prime tower interface options

  • Type: boolean
  • Default: off
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

flush_into_infill

Flush into infill

  • Type: boolean
  • Default: off
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

flush_into_objects

Flush into objects

  • Type: boolean
  • Default: off
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

flush_into_support

Flush into support

  • Type: boolean
  • Default: on
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

inner_wall_filament_id

Inner wall filament id

  • Type: integer
  • Default: 0
  • Recommended range: 0 to no maximum
  • Changing it redoes: perimeters
  • PrintPilot class: read (not in the catalog: never written)

internal_solid_filament_id

Internal solid filament id

  • Type: integer
  • Default: 0
  • Recommended range: 0 to no maximum
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

ooze_prevention

Ooze prevention

  • Type: boolean
  • Default: off
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

outer_wall_filament_id

Outer wall filament id

  • Type: integer
  • Default: 0
  • Recommended range: 0 to no maximum
  • Changing it redoes: perimeters
  • PrintPilot class: read (not in the catalog: never written)

prime_tower_brim_width

Prime tower brim width

  • Type: number
  • Unit: mm
  • Default: 3
  • Recommended range: -1 to no maximum
  • Values: -1
  • Used only when: Prime tower (enable_prime_tower) is on
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

prime_tower_enable_framework

Prime tower enable framework

  • Type: boolean
  • Default: off
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

prime_tower_flat_ironing

Iron the prime tower flat

  • Type: boolean
  • Default: off
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

prime_tower_infill_gap

Prime tower infill gap

  • Type: percent (a number, 15 means 15%)
  • Unit: %
  • Default: 150
  • Recommended range: 100 to no maximum
  • Used only when: Prime tower (enable_prime_tower) is on
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

prime_tower_skip_points

Prime tower skip points

  • Type: boolean
  • Default: on
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

prime_tower_width

Prime tower width

  • Type: number
  • Unit: mm
  • Default: 60
  • Recommended range: 2 to no maximum
  • Used only when: Prime tower (enable_prime_tower) is on
  • Changing it redoes: paths
  • PrintPilot class: edit (may change in a plate override)

prime_volume

Prime volume

  • Type: number
  • Unit: mm3
  • Default: 45
  • Recommended range: 1 to no maximum
  • Used only when: Prime tower (enable_prime_tower) is on
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

single_extruder_multi_material_priming

Single extruder multi material priming

  • Type: boolean
  • Default: off
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

sparse_infill_filament_id

Sparse infill filament id

  • Type: integer
  • Default: 0
  • Recommended range: 0 to no maximum
  • Changing it redoes: infill
  • PrintPilot class: read (not in the catalog: never written)

standby_temperature_delta

Standby temperature delta

  • Type: integer
  • Unit: C (difference)
  • Default: -5
  • Recommended range: -1500 to 1500
  • Used only when: Ooze prevention (ooze_prevention) is on
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

support_filament

Support filament

  • Type: integer
  • Default: 0
  • Recommended range: 0 to no maximum
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

support_interface_filament

Support interface filament

  • Type: integer
  • Default: 0
  • Recommended range: 0 to no maximum
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

toolchange_cyclic_first_layer

Toolchange cyclic first layer

  • Type: boolean
  • Default: off
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

toolchange_cyclic_order

Toolchange cyclic order

  • Type: string
  • Default: empty
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

toolchange_ordering

Toolchange ordering

  • Type: enum
  • Default: "default"
  • Values: default, cyclic
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

top_surface_filament_id

Top surface filament id

  • Type: integer
  • Default: 0
  • Recommended range: 0 to no maximum
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_bridging

Wipe tower bridging

  • Type: number
  • Unit: mm
  • Default: 10
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_cone_angle

Wipe tower cone angle

  • Type: number
  • Unit: degrees
  • Default: 30
  • Recommended range: 0 to 90
  • Used only when: Prime tower (enable_prime_tower) is on
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_extra_flow

Wipe tower extra flow

  • Type: percent (a number, 15 means 15%)
  • Unit: %
  • Default: 100
  • Recommended range: 100 to 300
  • Used only when: Prime tower (enable_prime_tower) is on
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_extra_rib_length

Wipe tower extra rib length

  • Type: number
  • Unit: mm
  • Default: 0
  • Recommended range: no minimum to 300
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_extra_spacing

Wipe tower extra spacing

  • Type: percent (a number, 15 means 15%)
  • Unit: %
  • Default: 100
  • Recommended range: 100 to 300
  • Used only when: Prime tower (enable_prime_tower) is on
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_filament

Wipe tower filament

  • Type: integer
  • Default: 0
  • Recommended range: 0 to no maximum
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_fillet_wall

Wipe tower fillet wall

  • Type: boolean
  • Default: on
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_max_purge_speed

Wipe tower max purge speed

  • Type: number
  • Unit: mm/s
  • Default: 90
  • Recommended range: 10 to no maximum
  • Used only when: Prime tower (enable_prime_tower) is on
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_no_sparse_layers

Wipe tower no sparse layers

  • Type: boolean
  • Default: off
  • Used only when: Prime tower (enable_prime_tower) is on
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_rib_width

Wipe tower rib width

  • Type: number
  • Unit: mm
  • Default: 8
  • Recommended range: 0 to 300
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_rotation_angle

Rotation of the wipe tower

  • Type: number
  • Unit: degrees
  • Default: 0
  • Used only when: Prime tower (enable_prime_tower) is on
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_sparse_layers_combination

Wipe tower sparse layers combination

  • Type: boolean
  • Default: off
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

wipe_tower_wall_type

Wipe tower wall type

  • Type: enum
  • Default: "wtwRib"
  • Changing it redoes: paths
  • PrintPilot class: read (not in the catalog: never written)

wiping_volumes_extruders

Wiping volumes extruders

  • Type: list of numbers, one per extruder
  • Default: [70,70,70,70,70,70,70,70,70,70]
  • Changing it redoes: G-code only
  • PrintPilot class: read (not in the catalog: never written)