SlicerXDesign in your browser

SlicerX / Working with models

From a CAD edit to a 3D print preview

Explore SlicerX’s free, open-source CAD engine: mesh modeling, STEP import and editable history, through to a layer-by-layer print preview.

By SlicerX. The app is pre-alpha; these guides distinguish current tools from features still in development.

Keep modeling and slicing connected

A printable model and a useful toolpath are different things. Modeling defines the shape; slicing determines how a printer will build it. Even a small shape change can alter wall placement, supports or the first layer, so the loop between the two matters.

SlicerX is a free, open-source CAD engine and 3D printing slicer. You can change a part in the Model workspace and then inspect the new slice without exporting it into another application. This is particularly useful when a downloaded model needs a small adjustment rather than a complete redesign.

Know what happens to your file

SlicerX opens formats including STL, 3MF, OBJ and STEP. Its modeling engine works on triangle meshes. A STEP file is imported through Open CASCADE and arrives as a mesh; its curves become facets rather than remaining editable analytic surfaces in a B-rep kernel.

That distinction affects which edits are possible. A straight edge between flat faces is different from the faceted boundary of a curved surface. For a critical dimension or curve, inspect the imported shape and the result of each operation. Keep the original design file as well as your SlicerX project.

CAD tools and current limitations

Make a small, inspectable edit

For a new part, sketch on the bed or a flat face and extrude or revolve the profile. For an existing part, push or pull a flat face to add or remove material. Fillet and chamfer tools work on supported straight edges between flat faces.

Change one thing, then inspect it. Check the dimensions that matter to the fit. SlicerX can keep measurements on the model, and its history lets you revisit an earlier step. There is currently no constraint solver, so typed dimensions are not a network of constraints that automatically solves the whole design.

Use history with the next operation in mind

Editing a previous history step reruns the later steps. If a later operation depends on a face or edge that no longer exists, it may no longer work. SlicerX marks a broken step with the engine’s reason rather than presenting a half-applied result.

Use that feedback to decide whether to change the earlier edit or remove the dependent operation. The detailed CAD guide explains suppression, reordering and the operations that end history. Saving a 3MF preserves the current mesh and SlicerX’s modeling history; another slicer can read the mesh while ignoring the extra history data.

Check the slice after the edit

After the model is ready, choose the intended printer, nozzle, filament and process settings. Inspect the first layer and step through the layers around the changed area. Look for continuous walls, sufficient bed contact and any new supports or tool changes.

A visually correct model can still slice in a way you did not expect. Preview is the place to catch that difference before a physical print. If you find a reproducible problem, share the smallest example that shows it and the settings needed to recreate it.

Prepare your plate · Inspect the toolpaths · Report a slicing problem

Keep exploring